Cart

AJA, IPT-10G2-SDI, 3G-SDI to SMPTE ST 2110 Video and Audio IP

US$1,760.00

Write Review

AJA, IPT-10G2-SDI, 3G-SDI to SMPTE ST 2110 Video and Audio IP Encoder with Hitless Switching Overview IPT-10G2-SDI is designed to bridge 3G-SDI video sources into SMPTE ST 2110 networks. The IPT-10G2-SDI receives baseband video plus up to 16 embedded audio channels over 3G-SDI, then encapsulates the data for output as ..

  • Model : IPT-10G2-SDI
  • Manufactured by : AJA
favorite_border Add to Wishlist
+
-
AJA, IPT-10G2-SDI, 3G-SDI to SMPTE ST 2110 Video and Audio IP Encoder with Hitless Switching

Overview

IPT-10G2-SDI is designed to bridge 3G-SDI video sources into SMPTE ST 2110 networks.
The IPT-10G2-SDI receives baseband video plus up to 16 embedded audio channels over 3G-SDI, then encapsulates the data for output as SMPTE ST 2110 over 10 GigE. Associated audio from the video stream is extracted, synchronized, and embedded into the SMPTE ST 2110 stream. Alternatively stereo audio can be fed into the stream from the dual RCA inputs.
2x 10 GigE SFP+ cages are provided, allowing “hitless switching” (ST 2022-7) redundancy protection for critical contribution and transmission environments.

Key features:

SMPTE ST 2110 audio, video transmitter
Rugged, quiet, fanless design
3G-SDI Transmitter with 1x full size BNC input up to 1080 60p, 4:2:2, 10-bit, YCbCr
Full 10-bit pixel processing pipeline
Embedded SDI audio input (up to eight channels)
2x RCA analog audio input
2x 10 GigE SFP+ cages for media LAN (providing support for ST 2022-7 "Hitless Switching") with status light
1x 1 GigE RJ-45 socket for control LAN with status light
Reference Out connector to provide PTP locked sync to baseband sources for lowest latency
Frame sync to retime baseband sources that are not locked to PTP
Web browser accessible setup and control interface, via built-in web server
1x mini-USB port providing an alternate method of initial network configuration with AJA eMini-Setup software
NMOS and Ember+ support
Customizable control with AJA REST API
Five year warranty

Bridge 3G-SDI Sources to Anywhere on a SMPTE ST 2110 Network
With new IP based facilities often requiring integration with traditional baseband sources, and with existing 3G/1.5G-SDI routers often at capacity while facilities undertake their transition to IP, IPT-10G2-SDI provides a solution for converting baseband camera, router or edit bay sources, and then formatting and transmitting via IP to provide that content to a range of destinations.

User Control
IPT-10G2-SDI provides two key methods for control. The Control LAN Ethernet port enables control of the Mini-Converter from web browsers on any platform and REST clients. The mini-USB connector facilitates quick and simple initial network configuration and firmware updates with AJA eMini Setup software.
1x RJ-45 (IEC 60603-7) for 10/100/1000 Base-T Ethernet (IEEE 802.3-2012)
HTTP/1.1 (RFCs 7230, 7231, 7232, 7233, 7234, 7235)
Browser and REST clients supported
1x USB 2.0 Mini-B (IEC 62680-1) connector
Browser-based or AJA eMini-Setup of network parameters
NMOS transmit (Discovery, Registration and Control)
According to standards IS-04 v1.3 & IS-05 v1.1
LLDP (Link Layer Discovery Protocol)
AJA REST API (Control Only)
Discovery is supported via SSDP, allowing AJA REST API to then be used for Control
Discovery is also supported via MDNS, allowing AJA REST API to then be used for Control
Ember+ (no Discovery, Control only) v1.6.2
Note: V2Analog does NOT up-convert or down-convert between SD and HD resolutions. Only digital to analog signal conversion is supported.

Universal Power Supply
All AJA Mini-Converters ship with a universal power supply that includes international plug connections for use around the world.
Compact and Portable
AJA Mini-Converters are small enough to fit behind a monitor, in the back of a rack, or directly on a camera rig. A locking power connector can't accidentally pull loose and an optional P-TAP power cable allows for battery power in remote locations.

There are currently no product reviews.

Write Review