Cobalt Digital, openGear 9904-UDX-4K-DSP, 4K UDX & FS w/ Advanced Audio
Description
12G/6G/3G/HD/SD-SDI Input/Outputs
(6) 75Ω inputs (max)
(8) 75Ω outputs (max)
SDI Formats Supported: SMPTE ST2082-1,10, 424M, 292M, SMPTE 259M-C. All inputs/outputs 12G compliant and SDQS/2SI quad 3G compliant.
Return Loss:
> 15 dB up to 1.485 GHz
> 10 dB up to 3 GHz
> 7 dB up to 6 GHz
> 5 dB up to 12 GHz
Input Cable Length:
45m Belden 1694A cable at 11.88 Gbps
120m Belden 1694A cable at 2.97 Gbps
240m Belden 1694A cable at 1.485 Gbps
400m Belden 1694A cable at 270 Mbps
Output Signal Level: 800 mV ±10%
DC Offset: 0 V ± 50 mV
Rise and Fall Time @ 11.88 Gbps: < 45 ps
Alignment Jitter (12G/3G/HD/SD): < 0.3/0.3/0.2/0.2 UI
Frame Sync Audio/VIdeo Delay
Max offset: 20 frames
Latency (min): 1 frame
User Audio Delay Offset from Video
Bulk delay control: -33 msec to +3000 msec.
Per-channel delay controls: -800 msec to +800 msec
AES Audio Inputs/Outputs
(8) AES-3id 75Ω coaxial ports; port direction assignable as inputs or outputs in groups of 4 ports.
Note: Hardware rev –E and later has 8 AES ports; earlier versions have 4 port max.
MADI Audio Inputs/Outputs
(2) 75Ω coaxial ports (max)
Note: Not all rear modules support full MADI I/O. MADI I/O is a function of Rear Module used
and is available only on card with on rev C (or later) hardware with firmware supporting MADI I/O.
See Rear Module illustrations for specific information.
HDMI Input (Option -H2S only)
HDMI 2.0 Input; mini connector
HDMI Output
HDMI 2.0 Output; type A standard connector
GPIO
6 GPI (max); 2 GPO (max)
Note: GPIO max capacity is a function of Rear Module used. See Rear Module Options tab for specific information.
Frame Reference Input
(2) reference from frame bus. SMPTE 170M/318M “Black Burst”, SMPTE 274M/296M “Tri-Level”
Frame Loading (Max. recommended number of 9904 cards supported (by Frame Model)
•OG3 Frame: (5) cards
•HPF-9000 Frame: (5) cards
•oGx Frame: (7) cards
Note: In all cases, it is recommended to leave a 1RU gap above the frame and set frame Network Controller Card to run the frame cooling fans at full (max.) speed.
