Data Video, Robotic Pan Tilt Head, PTR-10 MARK II

Description

Datavideo’s brand-new PTR-10 MARK II is a robotic pan-tilt head that is designed to turn any small size video camera or block cameras into a robotic

A sleek design fits seamlessly in your studio. With its weight of 3.4 Kg, it can be placed on any heavy-duty tripod or mounted on the wall and ceiling which brings up a lot of flexibility for your video production.

The PTR-10 MARK II can be controlled by the included IR controller, VISCA protocol controller, Datavideo RMC-180 Camera controller, RMC-300A Universal Remote-Control Panel, and compatible with DVIP over Ethernet and other integration solutions such as Crestron.


Cost-Effective
PTR-10 MARK II makes the change from regular camcorder cameras to remote controlled PTZ very cost effective. Multi-camera remote operations can be handled by a single person.

Wide Range of Compatible Cameras Supported
The PTR-10 MARK II implements LanC control that is compatible with a wide range of professional video camcorders, allowing you to select the best camcorders for your needs.

Light Weight, Strong, and Sturdy design

With a weight of 3.4 kg, PTR-10 MARK II is built from aluminum alloy, making it a very sturdy base for your camera. It can support cameras up to 4 kilograms.

Diversified Controller Options
Compatible with Serial, Ethernet, and Lanc. Datavideo RMC-180 series, RMC-300A, and HS-1600T series (T model only) will fit your need.
Built-in Tally light
With the big tally light in the front to show the status of your camera.

D-tap connector for DC output
The D-tap connector is widely used in the broadcast industry as a standard for powering accessories from battery or mains power. This will make it easier for you to find a ready-made power cable for your specific camera. Included is a D-tap to DC 5.5mm with lock for Datavideo cameras.

Selectable DC voltage output for different cameras (7.4 / 8.4 / 10 / 12V )

Multiple Signal Interface
PTR-10 MARK II supports a lot of signal interface for passing through the remote head. Amongst these interfaces are SDI, HDMI, RS-232, RS-422, DVIP, Tally, and LANC.

Optional Accessories: ZEK-1 Zoom Encoder Kit

ZEK-1 is the solution to your free running Zoom cameras.
PTR-10 MARK II can read its own Pan/Tilt movement and send back to controller for position memory and recall. Now, with ZEK-1, it can detect and read out the Zoom changes. And convert those information into Zoom position to send back for controller to memory and recall the saved zoom position. Compatible with cameras via zoom moving ring.

Specifications
PTR-10 Mark II Robotic Pan Tilt Head
Video Interface
HDMI x 1
SDI x 1

Video Output
2160p 29.97/25
1080p 59.94/50
1080i 59.94/50
720p 59.94/50

Control Unit
RMC-180
RMC-300A
VISCA Protocol Controller
IP Control
IR remote

Panning / Tilting Range
Pan: 340°
Tilt: ±45°

Panning / Tilting Speed
Pan: 0.12~15° /Sec
Tilt: 0.06~10° /Sec

Preset
Pan/Tilt position 50

Control Distance
Sony VISCA
DVIP

Control Protocal
Sony VISCA
DVIP

Control Input
RS-422
DVIP

Maximum Load
4 KG Max

Control Output
RS-232
RS-422
BX-Lens
LanC

Power Requirement
DC 12V~ 18V, 3A (Without Camera)
DC 12V~ 18V, 5A (With Camera)

Power Supply
DC 12/10/8.4/7.4V, 24W Max

Operating Temp. Range
0~40 C°

Operating Humidity Range
10~80%

Storage Temp. Range
-10~60C°

Storage Humidity Range
5~80%

Weight
3.4 kg

Dimension (LxWxH)
230 x 190 x 300 mm

What's in the Box
PTR-10 Mark II Main Unit x 1
DC 12V power adaptor x 1
AC cord x 1
IR remote control x 1
DC with lock to D-Tap cable x 1
HDMI cable x 1
SDI cable x 1
Remote cable (2.5mm phone-jack to mini-din 8pin) x 1
1/4” screw (14mm) x 2
1/4” screw (10mm) x 1
1/4” to 3/8” screw adaptor x 1
PTR-10 Mark II Thank You Card x 1