Cobalt Digital, openGear 9903-UDX-ADDA, 3G/HD/SD-SDI Format Converter

Description
Power
< 13 Watts

SDI Input/Outputs
Up to (2) 75Ω BNC inputs
Up to (4) 75Ω BNC outputs
SDI Formats Supported: SMPTE 259M, SMPTE 292M, SMPTE 424M
SDI Receive Cable Length: 3G/HD/SD: 120/180/320 m (Belden 1694A)
SDI Return Loss: >15 dB up to 1.485 GHz; >10 dB up to 2.970 GHz
SDI Alignment Jitter: 3G/HD/SD: < 0.3/0.2/0.2 UI
Timing Jitter: 3G/HD/SD: < 2.0/1.0/0.2 UI
Note: SDI Return loss and receive cable length are affected by rear I/O module used. Specifications represent typical performance.

Analog Video Input/Outputs
(1) 75Ω BNC CVBS input
(1) 75Ω BNC CVBS output. CVBS can be upscaled to any supported SDI format; all SDI formats can be downconverted to CVBS.
(3) 75Ω BNC Component Video inputs (Y, Cb, Cr)
(3) 75Ω BNC Component Video outputs (Y, Cb, Cr)
ADC resolution: 10-bit
Sampling frequency: 54 MHz (4x over-sampling SD)
SD Y/C separation: 5-line Adaptive Comb Filter
SD Freq. Response: ± 0.25 dB to 5.5 MHz
SD SNR: > 55 dB to 5.5 MHz (unweighted)
Differential Phase: < 1 degree
Differential Gain: < 1%
Nonlinearity < 1%
HD Freq. Response: Y 30 MHz., PbPr 15 MHz
HD SNR: > 55 dB to 30 MHz (unweighted)

Discrete Audio Input/Outputs
(8) AES-3id 75Ω BNC input
(8) AES-3id 75Ω BNC output
(2) Balanced analog audio inputs
(2) Balanced analog audio outputs
I/O conforms to 0 dBFS = +24 dBu
Analog Input Impedance: >10 kΩ
Analog Reference Level: -20 dBFS
Analog Nominal Level: +4 dBu
Analog Input Clip Level: +24 dBu (0 dBFS)
Analog Freq. Response: ±0.2 dB (20 Hz to 20 kHz)
Analog SNR: 115 dB (A weighted)
Analog THD+N: -96 dB (20 Hz to 10 kHz)
Analog Crosstalk: -106 dB (20 Hz to 20 kHz)

ARC
ARC manually configurable (custom) or automatic triggering in full compliance/conformity with AFD (SMPTE 2016), VI (RP186), and WSS triggering.

GPIO/COMM
(2) GPI configurable to select input routing. (2) GPO configurable to invoke upon input selected. RS-232/485 comm port. All connections via rear module RJ-45 GPIO/COMM jack.

Frame Reference Input
(2) reference from frame bus. SMPTE 170M/318M “Black Burst”, SMPTE 274M/296M “Tri-Level”. Return Loss: >35 dB up to 5.75 MHz